Description of the device
General description of the MOTOREX DYNCO 2.0
General
Car manufacturers offer a wide range of vehicles with automatic transmissions. Car workshops and specialized technicians therefore need a reliable device for easy, automatic replacement of automatic transmission fluid (ATF). With the MOTOREX DYNCO 2.0, a single technician is all that is needed to carry out a fully automatic, dynamic and complete ATF flush on automatic transmissions and dual clutch gearboxes (DSG). Thanks to ATF flushing - in contrast to classic oil changes - it is ensured that an oil change rate of almost 100 percent is achieved.
The device has a unique electronic control system that allows the automatic transmission to be flushed without having to open the transmission housing. It works independently of temperature differences and the associated volume differences between the fresh and used (operating temperature) oil.
The DYNCO software not only controls the operation of the pump, but also the oil change process. It also checks whether there is enough fresh oil and whether the used oil container still has room for the replaced oil.
The device is equipped with easily removable containers for fresh and used oil and is conveniently operated via a color touch screen.
Functions
Automatic flow direction detection and setting
Automatic flushing additive detection and initiation of the flushing program
Automatic oil type change (no mixing with foreign oils)
Automatic volume monitoring in fresh oil and used oil containers
Oil temperature monitoring
ATF change independent of oil temperature
Pre-programmed viscosity curve for all relevant ATF and DCTF from MOTOREX
Pump capacity 5.5 liters per minute
Technical specifications
Power supply
12 V DC (vehicle battery)
Display
5-inch color display with touch operation
Printer
Thermal printer, 24 columns
Controller
Electronic control card and microcontroller
Pumps
Maximum flow rate: 5,5 Liter/min
Maximum pressure: 9 bar
Operating temperature
+ 5 °C bis + 40 °C
Dimensions
680 mm x 1275 mm x 520 mm (W x H x D)
Weight
approx. 75 kg
Animation of the MOTOREX DYNCO 2.0 functions
Last updated